Zip Aquapoint III 15 Ltr Unvented Water Heater Undersink
Part No: AP3/15
Application: Up to 3 wash hand basins - Undersink Capacity: 15 Ltrs Suitable for three basins. Rating: 2.2 Kw Hot water storage tank of 1.8mm glass enamelled steel tank and tested to 12 bar Fitted with sacrificial anode for added protection against corrosion for element and tank – must be checked regularly (6 months) and replaced where necessary as gradual erosion will occur. In extreme cases local water conditions can cause rapid erosion of the anode resulting in particles being deposited as a residue. Adjustable thermostat with a range up to 75 °C Resettable over temperature safety cut out Element 'ON' neon indicator High density CFC free polyurethane foam insulation. Energy rated: A Case: High impact and corrosion resistant white plastic. Taps: No special taps required. Approvals: WRAS approved and CE endorsed. Dimensions: H 480 x W 350 x D 310 Thermsal loss kWh/day: 0.62
Plumbing: Water connection 15mm BSP Minimum recommended water pressure 1 bar IP rating: 24 ERP rating: Class B Heating element: embedded rod type Pressure and temperature relief valve, where fitted, requires plumbing to waste in accordance with water byelaws. Electrical: To be wired to a double pole fused spur, minimum break rating of 13 amp. If you do not have this minimum length of pipe work then you will need to fit Pack AQ2. Warranty: 12 months on site parts and labour Performance Model heat up time to 15 °C Re-heat time to (70% vol) AP3/15 32 mins 18 mins Warranty: Manufacturers one year on site parts and labour. To download spec sheet click here For Accessories