Spatec NI

 
View Your Cart

There are no items in your cart.

 

Zip Aquapoint III 10 Ltr

Zip Aquapoint III 10 Ltr Image
Detail Image
Detail Image

Zip Aquapoint III 10 Ltr Unvented Water Heater Undersink



Part No: AP3/10



Undersink Single or multiple outlets

Application: Up to two wash hand basins

Capacity: 10 Ltrs

Suitable for two basins.

Rating: 2.2 Kw

Hot water storage tank of 1.8mm glass enamelled steel tank and tested to 12 bar

Fitted with sacrificial anode for added protection against corrosion for element and tank – must be checked regularly (6 months) and replaced where necessary as gradual erosion will occur.
In extreme cases local water conditions can cause rapid erosion of the anode resulting in particles being deposited as a residue.

Adjustable thermostat with a range up to 75 °C
Resettable over temperature safety cut out
Element 'ON' neon indicator
High density CFC free polyurethane foam insulation.
Energy rated: A

Case:

High impact and corrosion resistant white plastic.

Taps: No special taps required.

Approvals: WRAS approved and CE endorsed.

Dimensions: H 376 x W 256 x D 260

Plumbing: Water connection 15mm BSP
Minimum recommended water pressure 1 bar
IP rating: 24
ERP rating: Class B
Heating element: embedded rod type

Pressure and temperature relief valve, where fitted, requires plumbing to waste in accordance with water byelaws.

Electrical: To be wired to a double pole fused spur, minimum break rating of 13 amp.

Minimum length of pipe (from water heater to nearest draw off tap)

For a 10 Ltr Unit using 15mm pipe work:2.7 metres (9ft)
“ 22mm pipe work:1.2 metres (4ft)

If you do not have this minimum length of pipe work then you will need to fit Pack AQ2.

Warranty: 12 months on site parts and labour

Performance

Model heat up time to 15 °C Re-heat time to (70% vol)

AP3/10 18 mins 12 mins

Warranty: Manufacturers one year on site parts and labour

To download spec sheet click here

For Accessories

List Price:£320.64
Your Price:£256.51 (You save 20.00%)